WWII Revetment Walls | Pick & Mix | Build Your Own Trench | 28mm Terrain

Build your own WWII revetment wall bundle. Choose a bundle size in points, then tell us which numbered walls you want. These are physical 3D-printed walls, not digital files or STLs, supplied unpainted in grey eSUN PLA+.

Pick & Mix points table

Bundle prices:

16 Points – £37.99

26 Points – £59.99

42 Points – £96.99

Example: 2 × No.2 + 2 × No.3 + 1 × No.5 + 1 × No.6 = 16 points

How to build your bundle:

1. Choose 16, 26 or 42 points.

2. Pick your Wall Numbers. You can choose the same wall more than once.

3. Make sure the points add up to your bundle size.

4. Enter your choices in the required Wall choices box on this page, using wall numbers and quantities, for example: 2 x No.2, 2 x No.3, 1 x No.5, 1 x No.6.

Your final number of wall pieces depends on which designs you choose. If your choices don't add up to your bundle's points, we'll message you to adjust them before printing.

Sizes: No.1 is 54.5 mm long, No.2 and No.3 are 109.0 mm and No.4 is 163.5 mm (all 11.1 mm deep and 29.8–30.0 mm tall). No.5 has a 32.8 × 32.8 mm footprint and No.6 a 49.9 × 28.9 mm footprint. Photos 4 to 9 show Wall No. 1 to Wall No. 6 in order, and each wall also has its own listing.

The WWII Revetment Wall range is a set of freestanding, modular trench and revetment walls for building your own defensive lines and trench layouts. Each wall is corrugated revetment sheeting held by timber supports, with battlefield wear and detail. One face shows the corrugated sheeting and timber pickets; the other shows the horizontal timber rails behind it, so both sides look good on the table.

Every wall stands on its own and can be used individually or combined with others. All pieces share the same end profile, so any wall can be butted against any other to continue a line, and the corners and bends let you change direction. No glue or connectors are needed. The walls are numbered Wall No. 1 to Wall No. 6, and new designs will continue from No. 7.

Suitable for 28–32 mm tabletop wargaming. At about 30 mm tall, the walls are approximately 1:56 in overall height. They suit WWII battlefields first, and corrugated revetments also work on sci-fi, grimdark, industrial and post-apocalyptic tables.

Please note: these are freestanding walls, not full trench-channel sections with a floor. They are a separate range from our Modular Trench Sections 1–8 (sandbagged trench sections) and are not designed to connect to them.

Miniatures and paint are not included.

Material information

This item is 3D printed in PLA+, a bio-based plastic commonly made from renewable feedstocks such as corn starch or sugarcane, reducing reliance on fossil-based plastics. Each item is printed using quality-focused settings selected to suit the model, with fine or adaptive layer heights used where appropriate to achieve good surface detail and a clean finish. As an FDM 3D-printed product, minor layer lines may be visible and are a normal part of the manufacturing process.

This is generic tabletop terrain and is not affiliated with, endorsed by, or designed for any specific game system or brand. It is not an official or licensed product of any game manufacturer.

Example layout shown using multiple wall pieces. This listing includes only the walls you choose, in the bundle size selected.