WWII Revetment Wall No. 5 | 90° Corner | 28mm Wargaming Terrain

This is a physical 3D-printed WWII-style trench revetment wall for the tabletop, not a digital file or STL. It is supplied unpainted in grey eSUN PLA+, ready to prime, paint and weather.

Wall No. 5 is the 90° corner, used to turn a wall line through a right angle. Two short corrugated arms meet at a pair of timber corner posts. The corrugated face sits on the outside of the turn; turn the piece round to change which way the line turns.

The WWII Revetment Wall range is a set of freestanding, modular trench and revetment walls for building your own defensive lines and trench layouts. Each wall is corrugated revetment sheeting held by timber supports, with battlefield wear and detail. One face shows the corrugated sheeting and timber pickets; the other shows the horizontal timber rails behind it, so both sides look good on the table.

Every wall stands on its own and can be used individually or combined with others. All pieces share the same end profile, so any wall can be butted against any other to continue a line, and the corners and bends let you change direction. No glue or connectors are needed. The walls are numbered Wall No. 1 to Wall No. 6, so you can mix pieces and add more later.

Choose how many you need from the Pack Size menu: 1 Corner, 2 Corners, 4 Corners, 6 Corners, 8 Corners. Larger packs cost less per piece.

Features:

• WWII Revetment Wall No. 5: 90° Corner
• Approximate size: 32.8 × 32.8 × 30.0 mm footprint (each arm about 27 mm from the corner)
• Freestanding modular trench / revetment wall
• Corrugated sheeting with timber supports and battlefield wear
• Butts against any other wall in the range; no glue or connectors needed
• Suitable for 28–32 mm tabletop wargaming (approximately 1:56 in overall height)
• 3D printed in eSUN PLA+
• Supplied unpainted in grey PLA+, ready to prime, paint and weather

Suitable for 28–32 mm tabletop wargaming. At about 30 mm tall, the walls are approximately 1:56 in overall height. They suit WWII battlefields first, and corrugated revetments also work on sci-fi, grimdark, industrial and post-apocalyptic tables.

Please note: these are freestanding walls, not full trench-channel sections with a floor. They are a separate range from our Modular Trench Sections 1–8 (sandbagged trench sections) and are not designed to connect to them.

Miniatures and paint are not included.

Material information

This item is 3D printed in PLA+, a bio-based plastic commonly made from renewable feedstocks such as corn starch or sugarcane, reducing reliance on fossil-based plastics. Each item is printed using quality-focused settings selected to suit the model, with fine or adaptive layer heights used where appropriate to achieve good surface detail and a clean finish. As an FDM 3D-printed product, minor layer lines may be visible and are a normal part of the manufacturing process.

This is generic tabletop terrain and is not affiliated with, endorsed by, or designed for any specific game system or brand. It is not an official or licensed product of any game manufacturer.

Example layout shown using multiple wall pieces. This listing includes only the wall/pack size selected.